Features
  • Robust mechanical design 
  • 16–50 amps, 240–500Vac max. 
  • 1ø zero crossing fired 
  • LED status indicator 
  • Optional partial load fail 
  • Optional load current monitor and diagnostics 
The TE10S Series is a small but heavy-duty DIN rail mountable single phase SSC that is an environmentally responsible replacement for mercury contactors. Perfect for general purpose resistive or short wave infrared heating applications, the TE10S may be zero cross-fired from an AC or DC logic signal. It has a partial load fail option that activates an LED and an alarm when load current drops below a specified value. The PDSIO® input option allows the same two wires used for switching to be used to transmit heater and SSC health and RMS load current value to a companion Series 2000 controller. The TE10S is compatible with the REMIO digital communication interface. 

TECHNICAL SPECIFICATIONS

Dimensions (mm)  TE10S/TE10S with PLF:
16A: 115H x 35W (53W) x 93D, 320g/550g
25A:  115H x 53W (70W) x 93D, 500g/700g
50A:  115H x 105W (123W) x 93D, 880g/1200g
Load type:  resistive or short wave infrared
Firing Mode: zero voltage switching (synch. to line).
Operating temp: 0°C to 45°C (60°C with derating) 
Inputs:
DC Logic (LGC): ON >5V, 32V max. and >5mA, 10mA max., 
OFF <2V or <0.5 mA 
AC Logic (LAC): ON >30V, 55V max., input impedance 2k ohms
OFF <5V 
AC Logic (HAC): ON >85V, 265V max., input impedance 9.6k ohms,
OFF <10V 
PDS(1): Bi-directional diagnostic control input
PDS1: Heater break detect
PDS2: Load current monitoring
Optional: PLF/IPF(2) partial load fail

SCR Output Characteristics for Fusing

Parameter TE10S Rating
16A 25A 50A
IOUT (ARMS) 16 25 50
I2T for Fusing, tp = 10mS (A2S) 800 800 1800