|
Features
-
60-500 amps, 500Vac, max.
-
Selectable firing modes
-
Selectable input signal
-
Optional load diagnostics
|
|
| Physically similar, the TC2001
Solid State Contactor/ SCR Power Controller has all the features of the
TC2000, but incorporates additional electronics to handle a wider range
of three phase and single phase loads. Three phase resistive and inductive
or transformer coupled loads (delta or wye) can be controlled by fast or
slow cycle firing with adjustable first cycle delay or soft start ramping.
Closed loop power control |
with I-squared, V-squared or VxI
feedback is provided. Front panel bargraph displays are available for power
level and firing angle adjustment. A front panel port for the Model 260
diagnostic unit (available separately) is included. The features for partial
load unbalance and independent single phase operation are preserved. No
auxiliary supply is required. |
|
TECHNICAL SPECIFICATIONS
 |
|
Dimensions (mm): |
|
Up to 150A: 480H x 133W
x 268D; 10kg |
|
|
250A: 480H x 248W x
268D; 16kg |
|
|
300 to 500A: 570H x
248W x 268D; |
|
|
16.5kg |
|
|
750A: 560H x 373W x
510D |
|
|
900 to 1200A: 560H x
381W x 510D |
|
|
1650A: 790H x 472W x
471D |
| Load
type: |
|
Resistive |
| Firing
mode: |
|
Fast cycle with supply
voltage compensation |
| Operating temp: |
|
0°C to 45°C,
5-95% RH, non-condensing |
| Inputs: |
DC Logic: |
ON: >5.5V at >10.5mA,
25Vmax |
|
|
OFF: <0.7V or <2mA |
|
DC voltage: |
0-5V, 1-5V, 0-10V, 2-10V,
68Kž |
|
DC current: |
0-20mA, 4-20mA, 250ž |
|
Potentiometer: |
5Kž, external |
| Mounting: |
|
Panel mounting |
|
|
|
