|
Features
-
Controls up to 48 zones
-
LED diagnostics
-
DeviceNet™, Modbus® RTU and Profibus®-DP
ready
-
DIN rail mounted
-
Resistive, inductive and complex
loads
-
Connection to PC’s and PLC™’s
|
|
| The DIN Rail mountable REMIO (Remote
I/O) communications interface unit allows multiple solid state power units,
such as the TE10S, 425S or
any LOGIC input power switching module to
be distributed and time proportioned remotely by digital communications
from a supervising computer or PLC™. |
This solution saves the cost of
expensive PLC™ analog modules and offers a selection of firing modes that
can extend element life. Communications is via Modbus®, Profibus®
or DeviceNet™ |
|
TECHNICAL SPECIFICATIONS
 |
|
Dimensions: |
Base module: |
115 x 87.5 x 92.5 |
|
Base module w/extension: |
115 x 105
x 92.5 |
|
Base module w/two extensions: |
115 x 122.5
x 92.5 |
| Supply voltage: |
|
24Vac or 24Vdc (24VA
max.) |
| Base module
type: |
|
Time Proportioned Output
(TPO) Module or Digital input/output (Digital) Module |
| Expansion
modules: |
|
2 max. |
| TPO
module: |
|
16 outputs, 20Vdc modulated
with time proportioning output variable from 0-100%, internal 6.5mA current
limit |
| Logic
module: |
|
16 outputs,
20Vdc with internal 6.5mA current limit or 8 outputs and 8 Inputs per module |
| Firing
modes: |
|
Fast Cycle (8 cycles
on/ 8 cycles off @ 50% output) |
|
|
Intelligent
Half-Cycle |
| Communication: |
|
Modbus®-configurable
for 9.6 or 19.2 kbaud |
|
|
Profibus®DP |
|
|
DeviceNet™-configurable
for 125, 250 or 500 kbaud |
| Operating temperature: |
|
0ºC to 45°C |
|
|
