| PD/CTX is an intelligent current
transmitter designed for use with Series
2000™ controllers and load contactors. These two wire devices can transmit
load status and RMS load On-state current and also provide diagnostic information
on the power switching device. The status and current information can be
presented on a Series 2200 or 2400
controller which can be set up to alarm on high and low load currents as
well as on status alarms. |
Available with two modes of operation,
the PD/CTX can be used to fire a TE10S
SSC via the PDSIO® link
(Mode 2), a conventional third party SSR or a mechanical contactor
(Mode 5). |
