Features:

• Auxiliary powered & Loop powered Isolators
• 2kV 3-Way Isolation
• 32mm & 35mm DIN Rail Mounting
• LED Indication
• Ultra Slim 12.5 & 17.5mm wide packages
• Simple to use DIP Switch and Touch Calibration ranging
• 9-30Vdc Supply
• All Standard Process Inputs & Outputs
• L.E.D. indication with level indication and out of range alarm.
• U.L., cUL & CE marked
• ASIC Reliability
• Over 1,000,000 units in service world-wide

Features:

DIN Rail Mounting
LED Indication
Simple to use
24Vdc Supply
All Standard Process I/O
Multi-Channel
Direct Ethernet Connection

• 0.015% accurate 
• Process Calibrator 
• INTERFACING YOUR PC to the FACTORY

MMTCPCONV:   The Modbus Master Serial / TCP Converter enables serial devices communicating on RS232/485 using the Modbus Master protocol, such as Operator Interfaces, to be connected to an Ethernet network. The Modbus Master Converter is a Modbus converter from RS232/485 to Ethernet. The converter communicates using the standard Modbus/TCP protocol. The converter supports 4 TCP sockets. This means that a Modbus Master can communicate with up to 4 TCP slave devices.
Datasheet: HMMTCPMCONV

MMTCPCONV:  The Modbus Slave / TCP Serial Converter enables serial devices communicating on RS232/485 using the Modbus protocol, such as MOD-MUX modules, to be connected to an Ethernet network. The converter communicates using the standard Modbus/TCP protocol. This protocol is supported by many of the SCADA packages which are on the market. The result is a very simple and efficient way of connecting MOD-MUX devices to a PC or PLC on an Ethernet network. The converter supports 4 TCP sockets. This means that up to 4 devices can communicate with the MOD-MUX modules via the converter at any one time.
Datasheet: HMMTCPCONV
 

Ideal for:

• RS232-RS422 full duplex conversion
• Multi-dropping non-addressable devices
• Full duplex baud rate and character format conversion

Applications:
Energy Power Measurement, Generators, Substations & Distribution

AC Power (Single & Three Phase)
AC Voltage
AC Current
Phase Angle
Frequency
Potentiometer & Tap Positioner 
Power Monitoring Unit

The EMA acquisition unit is an accurate RMS current 
and voltage meter that can monitor up to 5 voltage 
and current channels. The measurements are available 
on the front panel display and remotely via digital 
communications.

Ideal for:

• 2500 Modular System
• All Standard 24VDC Systems
• Field Transducer Power Supplies

Datasheet: HA026604