3208      1/8 DIN Controller with Safety Messaging

HARDWARE CODE:
Model	3208: 48 x 96mm unit
Function	CC: PID Controller    CP: PID Programmable Controller    VC: Motorised Valve Controller    VP: Motorised Valve Programmer
Supply	VH: 85-264Vac VL: 20-29V dc or ac (Triac outputs not availble)
OP1 / OP2 / OP3	LRRX:   OP1: LOGIC I/O - OP2: Relay (N/O) - OP3: Relay (N/O) RRRX:   OP1: Relay (N/O) - OP2: Relay (N/O) - OP3: Relay (N/O) LLRX:   OP1: LOGIC I/O - OP2: Logic Output - OP3: Relay (N/O) LRDX:   OP1: LOGIC I/O - OP2: Relay (N/O) - OP3: DC Output (Ctrl/Retx) RRDX:   OP1: Relay (N/O) - OP2: Relay (N/O) - OP3: DC Output (Ctrl/Retx) DDDX:   OP1: DC Output - OP2: DC Output - OP3: DC Output (Ctrl/Retx) LLDX:   OP1: LOGIC I/O - OP2: Logic Output - OP3: DC Output (Ctrl/Retx) LDDX:   OP1: LOGIC I/O - OP2: DC Output - OP3: DC Output (Ctrl/Retx) DRDX:   OP1: DC Output - OP2: Relay (N/O) - OP3: DC Output (Ctrl/Retx) LTRX:   OP1: LOGIC I/O - OP2: Triac - OP3: Relay (N/O) (not with VL) TTRX:   OP1: Triac - OP2: Triac - OP3: Relay (N/O) (not with VL) LTDX:   OP1: LOGIC I/O - OP2: Triac - OP3: DC Output (Ctrl/Retx) (not with VL) TTDX:   OP1: Triac - OP2: Triac - OP3: DC Output (Ctrl/Retx) (not with VL)
Relay AA	R: Relay (form C)    X: Disabled
Comms, CT & Dig Input	XXX: Not Fitted    4CL: RS485 (2-Wire) Serial Communications - CT Input - Digital Input   2CL: RS232 Serial Communications - CT Input - Digital Input XCL: CT Input - Digital Input
Fascia Colour	G: Green
MANUAL LANGUAGE	XXX: No Manual ENG: ENGLISH
PRODUCT LANGUAGE	ENG: ENGLISH
QUICK CODE Part 1
Input Type	B: Thermocouple Type B (0....1820 deg C) J: Thermocouple Type J (-210....1200 deg C) K: Thermocouple Type K (-200....1372 deg C) L: Thermocouple Type L (-200....900 deg C) N: Thermocouple Type N (-200....1300 deg C) R: Thermocouple Type R (-50....1700 deg C) S: Thermocouple Type S (-50....1768 deg C) T: Thermocouple Type T (-200....400 deg C) C: Custom Thermocouple Type C (0....2319 deg C) P: RTD / Pt100 DIN 43760 (-200....850 deg C) M: 0 to 50mV Linear (-999..9999) 2: 0 to 20mA Linear (-999....9999) note 1 4: 4 to 20mA Linear (-999....9999) note 1
Setpoint Limits	C: Deg Celsius Full Range    F: Deg Fahrenheit Full Range    0: 0 to 100 deg C 1: 0 to 200 deg C 2: 0 to 400 deg C 3: 0 to 600 deg C 4: 0 to 800 deg C 5: 0 to 1000 deg C 6: 0 to 1200 deg C 7: 0 to 1400 deg C 8: 0 to 1600 deg C 9: 0 to 1800 deg C G: 32 to 212 deg F H: 32 to 392 deg F J: 32 to 752 deg F K: 32 to 1112 deg F L: 32 to 1472 deg F M: 32 to 1832 deg F N: 32 to 2192 deg F P: 32 to 2552 deg F R: 32 to 2912 deg F T: 32 to 3272 deg F
OP1	H: RELAY/LOGIC - CONTROL: HEAT (PID) C: RELAY/LOGIC - CONTROL: COOL (PID) J: RELAY/LOGIC - CONTROL: HEAT (ON/OFF) K: RELAY/LOGIC - CONTROL: COOL (ON/OFF) 0: RELAY/LOGIC - HIGH Alarm (Energised in Alarm) 1: RELAY/LOGIC - LOW Alarm (Energised in Alarm) 2: RELAY/LOGIC - DEVIATION HIGH Alarm (Energised in Alarm) 3: RELAY/LOGIC - DEVIATION LOW Alarm (Energised in Alarm) 4: RELAY/LOGIC - DEVIATION BAND Alarm (Energised in Alarm) 5: RELAY/LOGIC - HIGH Alarm (De-energised in Alarm) 6: RELAY/LOGIC - LOW Alarm (De-energised in Alarm) 7: RELAY/LOGIC - DEVIATION HIGH Alarm (De-energised in Alarm) 8: RELAY/LOGIC - DEVIATION LOW Alarm (De-energised in Alarm) 9: RELAY/LOGIC - DEVIATION BAND Alarm (De-energised in Alarm) L: RELAY/LOGIC - LOGIC INPUT: KEYLOCK M: RELAY/LOGIC - LOGIC INPUT: MANUAL R: RELAY/LOGIC - LOGIC INPUT: RUN/HOLD W: RELAY/LOGIC - LOGIC INPUT: ACKNOWLEDGE ALARM P: RELAY/LOGIC - LOGIC INPUT: SETPOINT 2 T: RELAY/LOGIC - LOGIC INPUT: RESET X: UNCONFIGURED
OP2	H: CONTROL: HEAT (PID) C: CONTROL: COOL (PID) J: CONTROL: HEAT (ON/OFF) K: CONTROL: COOL (ON/OFF) 0: HIGH Alarm (Energised in Alarm) 1: LOW Alarm (Energised in Alarm) 2: DEVIATION HIGH Alarm (Energised in Alarm) 3: DEVIATION LOW Alarm (Energised in Alarm) 4: DEVIATION BAND Alarm (Energised in Alarm) 5: HIGH Alarm (De-energised in Alarm) 6: LOW Alarm (De-energised in Alarm) 7: DEVIATION HIGH Alarm (De-energised in Alarm) 8: DEVIATION LOW Alarm (De-energised in Alarm) 9: DEVIATION BAND Alarm (De-energised in Alarm) X: NOT FITTED
RELAY AA	X: UNCONFIGURED H: CONTROL: HEAT (PID) C: CONTROL: COOL (PID) J: CONTROL: HEAT (ON/OFF) K: CONTROL: COOL (ON/OFF) 0: HIGH Alarm (Energised in Alarm) 1: LOW Alarm (Energised in Alarm) 2: DEVIATION HIGH Alarm (Energised in Alarm) 3: DEVIATION LOW Alarm (Energised in Alarm) 4: DEVIATION BAND Alarm (Energised in Alarm) 5: HIGH Alarm (De-energised in Alarm) 6: LOW Alarm (De-energised in Alarm) 7: DEVIATION HIGH Alarm (De-energised in Alarm) 8: DEVIATION LOW Alarm (De-energised in Alarm) 9: DEVIATION BAND Alarm (De-energised in Alarm)
QUICK CODE Part 2
Input CT Scaled	1: 10 Amps 2: 25 Amps 5: 50 Amps 6: 100 Amps X: NOT FITTED
Digital Input A	W: Acknowledge Alarm M: Manual Select R: Timer/Prog Run L: Keylock P: Setpoint 2 select T: Timer/Prog Reset U: Remote SP Select V: Recipe 2/1 Select X: Not Configured
Digital Input B	X: Not Configured W: Acknowledge Alarm M: Manual Select R: Timer/Prog Run L: Keylock P: Setpoint 2 select T: Timer/Prog Reset U: Remote SP Select V: Recipe 2/1 Select
OP3	H: CONTROL: HEAT (PID) C: CONTROL: COOL (PID) J: CONTROL: HEAT (ON/OFF) K: CONTROL: COOL (ON/OFF) 0: HIGH Alarm (Energised in Alarm) 1: LOW Alarm (Energised in Alarm) 2: DEVIATION HIGH Alarm (Energised in Alarm) 3: DEVIATION LOW Alarm (Energised in Alarm) 4: DEVIATION BAND Alarm (Energised in Alarm) 5: HIGH Alarm (De-energised in Alarm) 6: LOW Alarm (De-energised in Alarm) 7: DEVIATION HIGH Alarm (De-energised in Alarm) 8: DEVIATION LOW Alarm (De-energised in Alarm) 9: DEVIATION BAND Alarm (De-energised in Alarm) X: UNCONFIGURED
Lower Display	T: Setpoint P: Output Demand % R: Time to Run E: Elapsed Time 1: Alarm Setpoint A: Load Amps D: Dwell/Ramp-Time/Target N: NONE

NOTE 1: An external 1% current sense resistor is supplied as standard. If greater accuracy is required, a 0.1% 2.49 ohm can be ordered as part no. SUB2K/249R.1
NOTE 2: For Voltage output (0-5V or 0-10V), apply a suitable resistor across the DC output terminals (use RES500: 500 ohm for 0-10V, or RES250: 250 ohm for 0-5V)
NOTE 3: For Voltage input (0-10V), apply a voltage attenuator across the input terminals (use part number SUB21/I10V)