2132      1/32 DIN Controller

HARDWARE CODE:
Model	2132: 48x24mm unit
Function	CC: PID Controller NF: ON/OFF Controller TC: PID Controller and timer TN: ON/OFF Controller and timer
Supply	VH: 85-264Vac VL: 20-29V dc or ac
MANUAL	XXX: No Manual ENG: ENGLISH FRE: FRENCH GER: GERMAN NED: DUTCH SPA: SPANISH SWE: SWEDISH ITA: ITALIAN
Output 1 (Logic)	XX: No Function LH: LOGIC Output: Heating output LC: LOGIC Output: Cooling output M1: LOGIC Output: PDS Heater Break Detect (note 1) FH: LOGIC Output: High Alarm 1 FL: LOGIC Output: Low Alarm 1 DB: LOGIC Output: Deviation High Band 1 DL: LOGIC Output: Deviation Low Alarm 1 DH: LOGIC Output: Deviation High Alarm 1 NW: LOGIC Output: New Alarm AC: LOGIC Input: Alarm ack/reset KL: LOGIC Input: Keylock TM: LOGIC Input: Timer Off/On
Output 2 (Relay)	XX: No Function RC: RELAY N/O: Cooling output RH: RELAY N/O: Heating output FH: RELAY N/O: High alarm 2 FL: RELAY N/O: Low alarm 2 AL: RELAY N/O: High alarm 2 & low alarm 3 DB: RELAY N/O: Deviation band alarm 2 DL: RELAY N/O: Deviation low alarm 2 DH: RELAY N/O: Deviation high alarm 2 NW: RELAY N/O: New Alarm
Sensor Input	J: J Type Thermocouple (-210....1200 deg C) K: K Type Thermocouple (-200....1372 deg C) T: T Type Thermocouple (-200....400 deg C) L: L Type Thermocouple (-200....900 deg C) N: N Type Thermocouple (-200....1300 deg C) R: R Type Thermocouple (-50....1700 deg C) S: S Type Thermocouple (-50....1768 deg C) B: B Type Thermocouple (0....1820 deg C) P: Platinel II Type Thermocouple (0....1369 deg C) Z: RTD / Pt100 DIN 43760 (-200....850 deg C) C: C Type Thermocouple - W5%Re/W26%Re (Hoskins) (0....2319 deg C) D: D Type Thermocouple - W3%Re/W25%Re (0....2399 deg C) E: E Type Thermocouple (-250....1000 deg C) 1: Ni/Ni18%Mo Thermocouple (0....1399 deg C) 2: Pt20%Rh/Pt40%Rh Thermocouple (0....1870 deg C) 3: W/W26%Re (Engelhard) Thermocouple (0....2000 deg C) 4: W/W26%Re (Hoskins) Thermocouple (0....2010 deg C) 5: W5%Re/W26%Re (Engelhard) Thermocouple (10....2300 deg C) 6: W5%Re/W26%Re (Bucose) Thermocouple (0....2000 deg C) 7: Pt10%Rh/Pt40%Rh Thermocouple (200....1800 deg C) 8: Exergen K80 I.R. pyrometer (-45....650 deg C) M: -9.99 to 80.00mV Linear (-999..9999) Y: 0 to 20mA Linear (-999....9999) note 4 A: 4 to 20mA Linear (-999....9999) note 4 V: 0 to 10Vdc Linear (-999....9999)
Display Units	C: Celsius F: Fahrenheit K: Kelvin X: Linear Input  Min:   Max:
External Relay Module	XX: Not Fitted R7: Fitted (operated by the logic output)
Input Adaptor	XX: Not Fitted V1: 0-10Vdc A1: 0-20mA or 4-20mA 0.1% current sense resistor (2.49ohm)

NOTE 1: PDS heater break detect will transmit the power demand to a TE10S Solid State relay and read back a heater break alarm.
NOTE 2: Setpoint limits: Include the decimal position required in the displayed value. Up to one for temperature inputs, up to two for process inputs.
NOTE 3: An external 1% current sense resistor is supplied as standard. If greater accuracy is required, a 0.1% 2.49 ohm can be ordered as part no. SUB2K/249R.1